building. climate. excellence.
building. climate. excellence.
Compact, totally enclosed combined digital pressurisation units. System fluid is sampled from the system, isolated and subjected to a full vacuum. All dissolved air within the sample is liberated in accordance with Henry’s Law and vented to atmosphere. The deaerated fluid is then reintroduced to the system. This process is automatically repeated and controlled with a digital processor. A turbo mode is available for initial system setup to allow for rapid deaeration of new installations. The real-time display shows the status of the mechanical components.
System Volume (Guide): < 300,000 Litres - Pro PDG / Pro PDD.
Product Features:
System fill mode.
Password protected.
Bi-directional programming menu.
Onscreen Service Reminder - 12 Months.
MODBUS RTU Communication Protocol.
Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
Pressure setting in 0.1 bar increments.
Pump pulse option.
Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
Optional Additional Volt Free Contacts (Requires an additional factory fitted expansion board): Low Pressure Warning (N/O), High Pressure Warning (N/O), Low Water In Break Tank (N/O), Low Additive In Holding Tank (N/O), Pump 1 Run For Topup (N/O), Pump 2 Run For Topup (N/O).
Certifications and Standards Applied:
PED 2014/68/EU Sound Engineering Practice.
IEE - Electrical Safety Guidance.
EMC 2004/108/EC.
BS7074 Parts 1 to 3.
Machinery Directive 2006/42/EC.
Electronic Components have been tested and comply with the EMC Directives.
EN 61000-6-2: Generic Standards – Immunity standard for industrial environments.
EN61000-6-3: Generic Standards – Emission standard for residential, commercial and light industrial environment.
CE marked components, where applicable.
WRAS approved float valve to BS1212 part 2.
IP54 (BS EN60529) rated controller.
Material of Construction:
Cabinet: Mild steel CR4 Powder Coated.
Float Valve: WRAS Approved.
Break Tank: Polypropylene.
Cylinder: Stainless steel 304.
Valves: Brass. or Valves: Brass / PTFE.
Connection: Brass / Polypropylene.
Pipework: Braided flexihose / EPDM / Copper.
Flamco has been involved in the development, production and sale of high-quality components for use in HVAC systems since 1956. It is part of the stocklisted Aalberts NV, instituted in 1975. Along with Comap, which helps manage water and energy through its thermal and sanitary products that increase comfort in buildings, the Aalberts hydronic flow control business unit was constituted. Stronger together, Flamco and Comap will continue to build mission critical technologies to manage heating and cooling humanly with better financial and environmental efficacy. From source to emitter we partner with our customers to engineer seamless energy efficient hydronic systems for their building requirements.
comap.aalberts-hfc.com | aalberts-hfc.com
Stay up-to-date. Subscribe to our newsletter.
I agree to the processing of my personal data. Aalberts hydronic flow control attaches importance to your privacy.