building. climate. excellence.
building. climate. excellence.
Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.
The PressDS (Pressurisation/Dosing System) is a floor standing, additive top-up mixing pressurisation unit with a 4 litre break tank to be connected to the mains supply. 18 litre tank for additive storage. Each time the unit tops-up the system with water, it also automatically adds additive from a dedicated tank at a predetermined rate, reducing intervention and maximising system protection. The correct fluid mix is blended on demand at the time of system top-up. Available with double pump (for duty/standby configuration).
Application
Commercial and Industrial.
System Volume (Guide): < 300,000 litres.
Product Features:
For system volumes up to 300,000 litres.
Fluid Protection Category 5 (AB Weir Overflow).
Mix ratios from 1% to 50% user configurable balancing valves.
Top-up pressurisation unit (<18.0 l/min).
System fill mode.
Onscreen Service Reminder - 12 Months. Onscreen message when additive tank is empty.
Electric pump, 230V 50Hz 1ph.
Colour: Black (RAL 9005)
MODBUS RTU Communication Protocol.
Password protected.
Sequential programming menu.
Pressure setting in 0.1 bar increments.
Pump pulse option.
Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
Flamco has been involved in the development, production and sale of high-quality components for use in HVAC systems since 1956. It is part of the stocklisted Aalberts NV, instituted in 1975. Along with Comap, which helps manage water and energy through its thermal and sanitary products that increase comfort in buildings, the Aalberts hydronic flow control business unit was constituted. Stronger together, Flamco and Comap will continue to build mission critical technologies to manage heating and cooling humanly with better financial and environmental efficacy. From source to emitter we partner with our customers to engineer seamless energy efficient hydronic systems for their building requirements.
comap.aalberts-hfc.com | aalberts-hfc.com
Stay up-to-date. Subscribe to our newsletter.
I agree to the processing of my personal data. Aalberts hydronic flow control attaches importance to your privacy.