building. climate. excellence.
building. climate. excellence.
* Defined for a flow line temperature of 65 °C and heating of 40 K.
** Defined with a supply temperature of 65 °C and a heating of 35 K (other flow regulator are required).
The LogoComfort 500, 600 and 600+ are compact, ready-connected and decentralised interface units in which the hot water preparation and heating of the living space are controlled proportionally according to volume. LogoComfort 500 and 600 are available with static heating circuit (or with mixing circuit configurable with add-on modules) and the LogoComfort 600+ with direct mixing circuit.
Optional accessories available for each unit with the variant management system.
LogoComfort final units | |||
500 | 600 | 600+ | |
Dimensions (of the housings to be taken into account) (width x height x depth*) [mm] | 480 x 637 x 175 | 567 x 635 x 175 | 567 x 657 x 175 |
Bottom connections | 3⁄4" | 3⁄4" | 3⁄4" |
Stainless-steel plate heat exchanger (copper-soldered), vertical design to reduce the risk of calcification | ✓ | ✓ | ✓ |
PM controller with priority switching, anti-calcification coating and DVGW approval | ✓ | ✓ | ✓ |
Control valve for heating water (zone valve for connection to living space controller) | ✓ | ✓ | ✓ |
Bleed valve with hose connection on the heating side | ✓ | ✓ | ✓ |
Spool piece (3⁄4" × 110 mm) for an optional heat meter | ✓ | ✓ | ✓ |
Volume flow restrictor | ✓ | ✓ | ✓ |
Pipework made from insulated stainless-steel corrugated pipes | ✓ | ✓ | ✓ |
Mounted on base plate, with absolutely no mechanical stress, and inspected | ✓ | ✓ | ✓ |
Dirt trap with stainless-steel sieve insert and emptying function | 2 | 2 | 1 |
Second cold water connection for for the cold water supply of the apartment | ✓ | ✓ | ✓ |
Spool piece (3⁄4" × 110 mm) for an optional cold water meter | ✓ | ✓ | ✓ |
Differential pressure regulator – balancer (control range- 10 - 40 KPa) for autom. hydr. unit balancing | ✓ | ✓ | ✓ |
* Depending on the configuration and type of housing.
Optional accessories available for each unit with the variant management system.
LogoComfort final units | ||||
500 | 600 | 600+ | Order Code | |
Connection group - M 13HE (thermostatically controlled mixer circuit with HE pump) up to 10 heating circuits | - | Optional | - | M10512.2 |
Connection group - M 13HE (thermostatically controlled mixer circuit with HE pump) 11 to 12 heating circuits | - | Optional | - | M10512.23 |
Additional connection for stat. heating circuit only up to manifold for 7 heating circuits, upwards of 8 heating circuits only in conjunction with 600 base | - | - | Optional | - |
Heat exchanger (HE) for domestic water with high conductivity at 12 l/min. | Optional | - | Optional | MM10230.5SC |
Heat exchanger (HE) for domestic water with high conductivity at 17 l/min. | - | Optional | Optional | MM10232.58ES |
Connection group - M 27HE (thermostatically controlled mixer circuit with controlled actuator and HE pump) up to 10 heating circuits | - | Optional | - | M10512.21 |
Connection group - M 27HE (thermostatically controlled mixer circuit with controlled actuator and HE pump) 11 to 12 heating circuits | - | Optional | - | M10512.24 |
Domestic water circulation (pre-installed at the factory) with separate timer | - | Optional | Optional | M8 |
Connection group - M 12HE (thermostatically controlled mixer circuit with actuator and HE pump) up to 10 heating circuits * | - | Optional | - | M10512.22 |
Connection group - M 12HE (thermostatically controlled mixer circuit with actuator and HE pump) 11 to 12 heating circuits * | - | Optional | - | M10512.25 |
* An external controller is required to control the mixing circuit.
Flamco has been involved in the development, production and sale of high-quality components for use in HVAC systems since 1956. It is part of the stocklisted Aalberts NV, instituted in 1975. Along with Comap, which helps manage water and energy through its thermal and sanitary products that increase comfort in buildings, the Aalberts hydronic flow control business unit was constituted. Stronger together, Flamco and Comap will continue to build mission critical technologies to manage heating and cooling humanly with better financial and environmental efficacy. From source to emitter we partner with our customers to engineer seamless energy efficient hydronic systems for their building requirements.
comap.aalberts-hfc.com | aalberts-hfc.com
Stay up-to-date. Subscribe to our newsletter.
I agree to the processing of my personal data. Aalberts hydronic flow control attaches importance to your privacy.