building. climate. excellence.
building. climate. excellence.
UC = unmixed heating circuit, MC = mixed heating circuit. F or UP = application for flush-mounted version, S or AP = application for wall-mounted version, SI or AP insul. = application for wall-mounted version as insulation housing, UFH-M = floor manifold for mixed heating circuits, PW concept = prewiring concept, UC-L = extension for 2nd static heating circuit, FFR = mounting rails, BV = ball valve set.
The Logomatic G2 complete units permit combination with a wide range of complementary products for further functionalities and equipment for enhanced comfort and easier, optimised integration into building or installation technology. For instance, floor manifolds and prewiring concepts can be combined with one another and with the unit to save both time and space in installation. Moreover, mounting rails and extensions to the 2nd static heating circuit allow for easier preinstallation.
All underfloor manifolds are pre-assembled on a base plate and are fitted with the heating circuits specified below.
Underfloor manifold | |||
Type F | Type E | Type G | |
Width x height x depth [mm] (dimensions of the housings to be taken into account) | 576 x 503 x 1401) | 792 x 430 x 1401) | 500 x 452 x 1402) |
Connection to the heating circuits | 3⁄4" M - Eurokonus | 3⁄4" M - Eurokonus | 3⁄4" M - Eurokonus |
Arrangement of the supply connections: | top | top | top |
Heating circuit manifold material | Stainless steel | Stainless steel | Stainless steel |
Control range flow rate limiter [l/min.] | 0,5 - 5 | 0,5 - 5 | 0,5 - 5 |
Max. pressure load (bar) | PN6 | PN6 | PN6 |
Max. temperature load [°C] | 100 | 100 | 100 |
Valve inserts M30 × 1.5 with manual adjustment flaps | ✓ | ✓ | ✓ |
1) = installation depth increases to 160mm if prewiring packages are used or increases in general if floor terminal blocks and their mounts are installed.
2) = these floor manifolds are used with wall-mounted units. The wall-mounted housings supplied by our company require an increased installation depth. Therefore, please take the housing dimensions into account!
Flamco has been involved in the development, production and sale of high-quality components for use in HVAC systems since 1956. It is part of the stocklisted Aalberts NV, instituted in 1975. Along with Comap, which helps manage water and energy through its thermal and sanitary products that increase comfort in buildings, the Aalberts hydronic flow control business unit was constituted. Stronger together, Flamco and Comap will continue to build mission critical technologies to manage heating and cooling humanly with better financial and environmental efficacy. From source to emitter we partner with our customers to engineer seamless energy efficient hydronic systems for their building requirements.
comap.aalberts-hfc.com | aalberts-hfc.com
Stay up-to-date. Subscribe to our newsletter.
I agree to the processing of my personal data. Aalberts hydronic flow control attaches importance to your privacy.