building. climate. excellence.
building. climate. excellence.
The Logomatic G2 range is a new generation of highly efficient, compact, plug-and-play, decentralised and wall-mounted thermal interface units which offer electronically controlled hot water preparation, in line with the latest standards of hygiene, and space heating. Courtesy of its adjustable primary volume flow rate and the associated primary energy capability, the Logomatic G2 uses the minimum amount of energy required in hot water preparation; depending on the primary network conditions, it can further reduce the return line temperatures, thereby improving the network efficiency of the system as a whole. Also built into the system is adaptive hot water priority, automatic switching to increase customer comfort.
The Logomatic Comfort series offers 3 different output classes:
The S-Line.
The M-Line.
The L-Line.
Each output class is offered as follows:
As a ready-to-use thermal interface unit with a wide choice of complementary products.
With the supply of an unmixed heating circuit (UC) for radiator heating systems, a mixed circuit (MC) for underfloor heating systems or combined for both types of heating system (MC-UC).
With or without domestic hot water circulation (DHW-C).
With a simple copper-brazed (CU) or sealed (SX) plate heat exchanger.
As a possible unit for flush-mounted installation (F) by means of a coated steel housing or for surface use (SI) by means of a fully insulated housing including white designer front panel.
Additional features:
The Logomatic G2 M-Line is also available as a complete thermal interface unit including various complementary products such as a ball valve connection set, a surface- or flush-mounted installation housing and, depending on the type, a suitable flush-mounted manifold!
Available as a surface-mounted or “invisible”, space-saving flush-mounted version (from a depth of 110 mm, meaning that integration into lightweight walls is also possible).
State of the art thanks to electronic control (APP control* possible).
Highly efficient by virtue of its construction, type of control system and full EPP insulation.
For indirect hot water preparation & direct heat supply.
A high level of comfort thanks to the unit’s adjustable primary heat retention function (not via the heat exchanger and measurement circuit of the hot water meter).
Optional wireless consumption monitoring using an insulation housing with wireless transmission (available to order).
No sensitive moving parts in the domestic water supply for optimised operation with a long service life.
Optional thermal separation of the cold water connections to reduce the influence of heat on the cold water (in the case of the use of insulation housings).
Differential-pressure-controlled primary circuit for secondary heating.
Control function:
Automatic receipt of a commissioning log with setting values displayed as a CSV file.
Domestic water circulation with various setting and duration options.
Hot water circuit can be switched into disinfection mode (only when domestic hot water circulation is in use).
Adjustable hot water temperatures (30-60°C).
Frost protection function.
Profile function (floor screed heating function).
Heat demand via reference room control (ON/OFF via a potential-free contact.
Heat demand via weather-dependent heating circulation control.
Heating control via fixed value control.
Alarm and fault output.
Data communication by Mod-Bus (in planning).
Domestic water circulation with various setting and duration options.
Control by APP* and connection via Bluetooth for ease of commissioning using commissioning assistant, for firmware updates, etc.
*For control by APP and generation of the interface between the terminal device and the Logomatic G2, the terminal device must satisfy the following requirements
- iOS firmware version 12 or higher
- Android firmware version 6 or higher
- Possibility of access by the APP to the camera
- Bluetooth 4.0 or Bluetooth LE
Flamco has been involved in the development, production and sale of high-quality components for use in HVAC systems since 1956. It is part of the stocklisted Aalberts NV, instituted in 1975. Along with Comap, which helps manage water and energy through its thermal and sanitary products that increase comfort in buildings, the Aalberts hydronic flow control business unit was constituted. Stronger together, Flamco and Comap will continue to build mission critical technologies to manage heating and cooling humanly with better financial and environmental efficacy. From source to emitter we partner with our customers to engineer seamless energy efficient hydronic systems for their building requirements.
comap.aalberts-hfc.com | aalberts-hfc.com
Stay up-to-date. Subscribe to our newsletter.
I agree to the processing of my personal data. Aalberts hydronic flow control attaches importance to your privacy.